D322CL
Linear Drive Die Sinker EDM
Specification
Power Supplier Unit
Dielectric
- IN-HOUSE LINEAR MOTOR DRIVE SYSTEM
- HIGH MACHINING SPEED
- HIGH RESPONSE
- LOW FRICTION OF AXIS MOVEMENT
- MEDIUM-LOW CURRENT IMPULSE
- RAPID ENERGY CIRCUIT
Specification
| Model | Unit | D322CL |
|---|---|---|
| WORK TABLE SIZE(WXD) | mm | 500X350 |
| WORK TANK SIZE(WXDXH) | mm | 770x500x300 |
| WORK PIECE SIZE(WXDXH) | mm | 720x450x190 |
| Table travel (X,Y) | mm | 300x200 |
| Table travel (Z) | mm | 250 |
| X,Y,Z AXIS DRIVE | mm | X,Y AXIS BY AC SERVO MOTOR,Z AXIS BY LINEAR MOTOR |
| DISTANCE FROM RAM PLATEN TO WORK TABLE | mm | 250-550 |
| MAX.ELECTRODE WEIGHT | kgs | 20 |
| MAX.WORK-PIECE WEIGHT | kgs | 300 |
| Outside dimensions (WxDxH) | mm | 1040X1470X200 |
| Net weight | kgs | 1000 |
| PNEUMATIC REQUIREMENT | kgf/cm2 | 6 |
| FOR DIELECTRIC TANK | -- | D322L |
Power Supplier Unit
| --- | Unit | 50N | 75N | -- | -- |
|---|---|---|---|---|---|
| MAX.MACHINING CURRENT | A | 50 | 75 | -- | -- |
| MAX.POWER INPUT | KVA | 4 | 5 | -- | -- |
| ELECTRODE WEAR RATE | % | 0.2 | 0.2 | -- | -- |
| Best surface roughness | μm/Ra | 0.25 | 0.25 | -- | -- |
| Outside dimensions (WxDxH) | mm | 620x850x1860 | 620x850x1860 | -- | -- |
| Weight | kgs | 180 | 220 | -- | -- |
Dielectric
| --- | Unit | D322L |
|---|---|---|
| Volume | L | 280 |
| FILTER | method | PAPER FILTER |
| POWER | HP | 0.5 |
| Weight | kgs | BUILT IN |
| Outside dimensions (WxDxH) | mm | BUILT IN |
