G53S
G Series
1.High level of flexibility with low running cost.
2.The ideal machines for any EDM work shop.
3.In Submerged condition,maximum height of work-piece recommended is Z stroke minus 45mm.
Specification
Accessories
Standard/Optional Accessories
Optional Accessories£º
Specification
| Model | Unit | G53S |
|---|---|---|
| Axis Travel (XxY) | mm | 500x300 |
| Axis Travel (UxVxZ) | mm | 60x60x220 |
| Max. Size of Workpiece (WxDxH) | mm | 825x600x215 |
| Max. Weight of Workpiece | kg | 400 |
| XY Feed Rate | mm/min | Max. 800 |
| Axis Drive System | axis | AC Servo Motor |
| Wire Diameter Range (standard) | mm | φ0.15-0.3 (φ0.25) |
| Max. Wire Feed Rate | mm/sec | 300 |
| Wire Tension | gf | 300~2500 |
| Taper Angle | mm | ±14.5°/80 (wide-angled nozzle, DA+DB=15mm) |
| Outside Dimension (WxDxH) | mm | 2290x2270x2130 |
| Machine Weight | kg | 3195 |
| Tank Capacity | L | 650 |
Accessories
Standard/Optional Accessories
Standard Accessories£º
- Paper Filter x 2PCS
- Diamond Guides x 2PCS
- Upper/Lower Flushing Nozzles x 2PCS
- Energizing Carbides x 2PCS
- Diamond Guide Remove Jig
- Brass Wire (DIA.0.25mmX5kg)
- Tools
- AC Power
- Alignment Jig
- Flushing Ion Exchange Resins(1PCS x 3L)
- Submerged Ion Exchange Resins(1PCS x 6L)
- Auto Data Recovery after Blackout
- Water Chiller (Flushing) x 1T
- Water Chiller (Submerged) x 2T
Optional Accessories£º
- Swinging Panel
- 2-in-1 Transformer + AVR
- Auto Wire Threading(AWT)
- 30kgs Wire Feeder
- Auto Wire Chopper(30kg)
- DC Invert Chiller x 2T
